Magnetic AutoControl MicroDrive and FlowMotion Dual Control Panel (Includes Stickers) - PULT02

Details

Magnetic AutoControl MicroDrive and FlowMotion Dual Control Panel (Includes Stickers) - PULT02

The Magnetic Single Lane Control Panel is used as a manual control for barriers, pedestrian gates, or other devices. This control panel is helpful in a porter’s lodge or reception area. The PULT02 is a 2-channel device that can control two independent barriers, two pedestrian gates, or a combination of a pedestrian and barrier gate.

Standardized and white stickers are included to place on a membrane button if used for another function. The white stickers can be written on with a waterproof pen.

This Product Is The Direct Replacement For Former Magnetic AutoControl Part PG02

Button Functions

Button S1

Functions as a multi-stage switch.

Button S2

Is the ON/OFF switch.

Button S3 and S4

These switch buttons do not have any memory functions.

LED P4 and P5

Situated by the S3 and S4 buttons, the LEDs switch with one input and do not need to have the same feedback as the S3 and S4 buttons.

Power Supply

Desk panels can only be operated with a 24V (VCC/GND) and polarity is important to observe. When using PULT 02, channels are galvanically separated, so you can use this control panel for two barriers or pedestrian gates or combine separate pedestrian and barrier gates together.

Technology

Channels are controlled by a separate microcontroller.

Key Specifications

• Number of Channels: 1
• Power Supply: 24V DC ±10%
• Dimensions: 6.5” x 3.5” x 2”
• 4 Buttons Per Channel
• IP 65 Protection

A 10-core cable is needed to install the barrier and desk panel and is not included.

View Brochure