Magnetic AutoControl 115V Dual Channel Loop Detector - MID2C-200

Details

Magnetic AutoControl 115V Dual Channel Loop Detector - MID2C-200

*** This product has been discontinued and replaced with Magnetic AutoControl Dual Channel Loop Detector (24V). ***

The MID2C-200 115V Dual Channel Loop Detector is utilized for the recognization and detection of cars, trucks, forklifts, and other vehicles with metal chassis. Easy to setup, the loop detector module plugs directly into the MGC/MGC Pro control unit of the MHTM™ MicroDrive barriers. The channels communicate between each other, which allows for the monitoring of two induction loops placed in the road to detect vehicles. These connected channels can be set as safety loops, opening loops, or presence loops. By using one MGC controller for every pair of modules, you can increase the number of active modules to a maximum of 4 (However, only modules connected to the same controller are able to communicate between each other).

Features:

• Evaluation of two loops
• Detection of vehicle presence or vehicle direction
• Isolated transformer between loop and detector electronics
• Automatic calibration of the system after power on
• Continuous re-balancing of frequency drifts
• Usable for single place parking space supervising
• No mutual influence of loop 1 and loop 2 by multiplexing
• Sensitivity independent of the loop inductance
• Presence signal by LED display
• Potential free relay contacts for presence and pulse output
• Principle of relay operation changeable
• Signaling of loop frequency by LED
• Loop connection plug-in for diagnosis